A
1
Connect to WACS7000
ETHERNET
VOLTAGE
SELECTOR
NOT FOR ALL
VERSIONS
AUX
IN
R L
R L
LINE
OUT
TO Modem/PC
5V=1A
AP EC RP
TO Modem/PC
5V=1A
AP EC RP
Wireless Repeater 11g True Turbo
Wireless
Modem PC
Power
AP EC RP
Power
Wireless
SAME
ARTIST
SAME
ARTIST
Place the
Center
,
Station(s)
and
Extender
side by side on
a flat and firm surface
1
Connect the
Center
and
Station(s)
to power supply
➜
HD screen appears on the Station when the Station is
connected to the Center
2
Mount on the antenna and then connect the
Extender
to
power supply.
➜
When the Extender is ready for connection, both
Power
and
Wireless
indicators light up in blue (it takes 10-15
seconds),
3
IMPORTANT!
• Make sure the selector is set at
AP
position.
On the
Center
, press and hold
SAME ARTIST
until the
display shows “
OK for Extender...
”
4
On the
Station(s)
, press and hold
SAME ARTIST
until the
display shows “
OK for Extender...
”
➜
Connecting via the
Extender
starts (please ignore the
screen message “Center temporarily not available”)
➜
HD
screen appears on the
Station
when the Station is
connected to the
Center
via the
Extender
5
Connect WAR1900 to WACS7000
Note:
• The
SAME ARTIST
button on the 2-way remote control
that comes with WACS7000 doesn't have this function
