36
Date and time
The date and time can be set automatically or
manually.
Automatic setting
For automatic clock setting, use the online
service over the Internet, or use the time
signal from FM RDS radio.
Through the online service over the Internet
1
Turn on the unit, if necessary.
Ensure that the unit is connected to
the home network and Internet.
2
From Home screen, select
[Settings]
>
[Clock settings]
>
[Date and time]
.
3
In
[Date and time]
, select
[Current date
and time]
>
=^ !G >
.
»
The unit starts auto time setting over
the Internet.
»
A message appears when the setting
is done.
Tip
According to the location and time zone you
select, the unit can have the clock time set
and adjusted automatically through the online
service over the Internet.
To check and change current location and time
zone, go to
[Settings]
>
[Location and time
zone]
.
Automatic (Internet)
Manual
2
From Home screen, go to
[Settings]
>
[Clock settings]
>
[Alarm]
.
3
To set the alarm time,
Press and hold / , or press
/ repeatedly until you reach the
desired digits. Press / to select
the entry location. Press
OK
to
Or, enter the desired digits by
pressing the numeric buttons.
»
The alarm icon appears on the
screen.
Use the alarm
At the set alarm time, the buzzer sounds.
Note
The alarm sounds even if you have switched
MCi298 to active standby or Eco standby.
MCi298 is unmuted if it has been muted.
The alarm sounds in a higher volume if the
volume level is lower than minimum.
To snooze the alarm
Press any button on the unit or
the remote control (except for the
volume buttons).
»
The alarm sounds again 15
minutes later. The alarm icon
remains.
To stop the alarm
Press and hold or .
»
The alarm is stopped. The alarm
icon disappears.
»
The alarm sounds again next day.
To turn off the alarm
Go to
[Settings]
>
[Clock settings]
>
[Alarm]
. Select
[Alarm off]
and
tap on
OK
.
EN