3
English
EN
Installing
the
remote
contr
ol
Contents
1.
Introduction ...................................................................................... 3
2.
Installing the remote control .................................................... 3-5
Inserting the batteries ...................................................................................... 3
Testing the remote control ........................................................................ 3-4
Setting the remote control ....................................................................... 4-5
3.
Keys and functions .......................................................................... 6
4.
Troubleshooting ............................................................................... 6
5.
Need help? ........................................................................................ 7
Code list of all brands / equipment ............................................... 78-85
Helpline.....................................................................................................................86
Information to the Consumer ................................................................. 87
1. Introduction
Congratulations on your purchase of the Philips SRP 1001 universal
remote control. The SRP 1001 is a handy zapper with all main keys
and ergonomic shape for comfortable control.
After installing the remote control it can operate the most-used
functions of almost any brand of TV.
You can find information about how to prepare this remote control
for use in the chapter ‘Installing the remote control’.
2. Installing the remote control
Inserting the batteries
1
Press the cover inwards
and lift it up.
2
Place two R03, UM4 or AAA type
batteries into the battery
compartment, as shown.
3
Replace the cover and click it firmly
into place.
Testing the remote control
Because the SRP 1001 may use different signals for each brand and
even for different models of the same brand, it is advisable to test
whether your TV responds to the SRP 1001.
The example below instructs you how to do this.
1
Turn your TV on manually or use the original remote control.
Tune to channel 1.
2
Check whether all the keys
are working. For an overview of the
keys and their functions see ‘3. Keys
and functions’.
–
If the TV responds as it should to all
of the key commands the SRP 1001
is ready for use.
SRP1001_10_Transfer:125254c4_SRU5110_86 19-06-09 15:15 Pagina 3
Downloaded from www.vandenborre.be
