5
EN
abnormal care or uses, or abuse; (d) damage
due to non-authorized program or system
equipment modification or alteration; or (e)
damage to equipment that was not directly
connected to the surge protector at the time
of the Occurrence. This Connected Equipment
Warranty only cover during Product Warranty
period. The “Protection Working” indicator
light will no longer be lit when this capacity is
exceeded. The capacity of the surge protector
will be exceeded after an occurrence. This
warranty is limited to losses that are not
covered by a warranty from the manufacturer
of the connected equipment, or by the
consumer’s homeowners insurance or renter’s
insurance policy. Consumer agrees to first
seek coverage under any such warranty or
policy, and not seek duplicate coverage from
Philips. Consumer agrees to provide insurance
information to Philips, at its request; and after
a claims settlement, if applicable, Philips
reserves the right to be subrogated under any
existing warranty from the manufacturer of the
connected equipment or under any existing
insurance policies the claimant may have.This
warranty is limited to surge protectors which
indicate on the packaging an accompanying
connected equipment warranty. After any
repair or modification of the surge protector
by a facility not authorized by Philips, any
problems that arise will not be remedied under
this warranty.Your Philips surge protector must
be plugged into a properly grounded outlet.
All connected equipment must be plugged
directly into your surge protector. Using any
extension cord, adapters, other grounding
wires or electrical connections in conjunction
with a Philips surge protector will void all
Philips warranties. All wires leading into the
equipment, including telephone and coaxial
lines, must pass through an appropriate Philips
surge protector.
To claim damage as a result of coaxial line
transients, equipment must be properly
connected to a Philips surge protector which
offers coaxial line protection (see the user
manual for installation instructions). If you
fail to connect the coaxial cable protection
properly, your connected equipment will not
be covered by the Connected Equipment
Warranty. The customer service department
will provide the consumer with a Return
Authorization number (RA#). Philips will
determine, at its sole discretion, whether
consumer should send the damaged
equipment and the surge protector to Philips,
or to an independent repair facility. If Philips
so requests, the consumer must, at his/her
own expense, send the damaged equipment
and the surge protector, along with a copy
of the sales receipt, to the specified location,
in secure packaging (to prevent further
damage) with the RA# clearly displayed
on the outside of the package, and with
a full written description of the problem,
including the consumer’s name, address,
and daytime phone enclosed. Philips also
reserves the right to examine the site where
the damage occurred.If Philips determines
that the Connected Equipment Limited
Warranty covers the damaged equipment,
and that the equipment was damaged
as a result of the surge protector which is
covered under the Surge Protector Limited
Warranty, Philips will either (a) authorize
repair of the connected equipment, at a cost
up to the maximum amount set forth on the
packaging of the surge protector involved;
(b) provide the consumer with an equivalent
equipment replacement; or (c) reimburse the
consumer for the present fair market value
of the damaged connected equipment. If,
applicable, the equipment will be returned
from Philips to the consumer at Philips
expense.
•
Summary of Contents for SPN7040
Page 2: ......
