Philips Speechmike 6294 Configuration Manual Download Page 24

Page: 24 / 92

SE-923 is Decode UPC/EAN Supplementals

Parameter # 0x10

Supplementals are additionally appended characters (2 or 5) according to specific
code format conventions (e.g., UPC A+2, UPC E+2, EAN 8+2).
Three options are available.

If UPC/EAN with supplemental characters is selected, UPC/EAN symbols

without supplemental characters are not decoded.

If UPC/EAN without supplemental characters is selected, and the 6284

is presented with a UPC/EAN plus supplemental symbol, the UPC/EAN is

decoded and the supplemental characters ignored.

An autodiscriminate option is also available. If this option is selected, scan

Decode UPC/EAN Supplemental Redundancy on page 26, then select a

value from the numeric bar codes beginning on page 78.

A value of 5 or more is recommended.

Note: In order to minimize the risk of invalid data transmission, we

recommend that you select whether to read or ignore supplemental
characters.

Select the desired option by scanning one of the bar codes on the following page.

Summary of Contents for Speechmike 6294





























































































Search results

Summary of Contents for Speechmike 6294

Reviews:

Brands by name

Popular brands

Philips Speechmike 6294, Configuration Manual

Search results

Summary of Contents for Speechmike 6294

Reviews:

Brands by name

Popular brands