SpaceWise for Office Applications
v. 3.7
32
Philips Lighting North America
b.
Point remote to
any
luminaire and press
“Open,” once.
Wait for the luminaire to dim
down to 5%.
Make sure the button is pressed only once. Pushing multiple times can
create multiple networks which can cause undesired operation.
c.
Press the “link” button on the sensor
once.
Yellow LED indicator on OSW
sensor will start blinking.
The LED indicator on OSW sensor
will turn green upon successful
linking of the sensor to the
group.
If the OSW sensor fails to join the group then red LED will turn on. In case
of failure repeat step “c.”
d.
Point to
any
of the luminaires in the
group and press “close.”
All the luminaires in the group
will go to 50% light level.
e.
Point to any of the luminaires in the
group and press “lock.”
Wait for LED to stop blinking (apx. 10
seconds) then press “send.”
Red LED on remote will start
blinking.
The luminaire will FLASH twice
and group will turn OFF and ON
once for Daylight calibration.