Philips sonicare HX91, Manual

Page: 18 / 28

- The sanitizer gives off smoke or a burning smell
while it is operating.
Note: UV light can be harmful to the human eye
and skin. This device should be kept out of reach
of children at all times.
1 After brushing, rinse the brush head and shake
off excess water.
Warning: Do not place the travel cap on
the brush head during sanitization.
2 Place your finger in the door recess on top of
the sanitizer and pull open the door.
3 Place the brush head on one of the 2 pegs in
the sanitizer with the bristles facing the light
bulb.
Note: Only clean Philips Sonicare snap-on
brush heads in the sanitizer.
4 Make sure the sanitizer is plugged into a live
outlet of appropriate voltage.
5
Close the door and press the green power
on/off button once to select the UV clean cycle.
Note: You can only turn on the sanitizer if the
door is properly closed.
Note: The sanitizer stops if you open the door
during the sanitizing cycle.
Note: The sanitizer cycle runs for 10 minutes
and then automatically shuts off.
- The sanitizer is in operation when the light
glows through the window.
18
English