Philips Sonicare FlexCare Platinum HX9141/20, Manual

Page: 12 / 44

2 Press and hold the power on/off button and the mode button for
2 seconds.
,
You hear 1 beep to indicate that the Pressure Sensor has been
deactivated.
,
You hear 2 beeps to indicate that the Pressure Sensor has been
activated.
Quadpacer
- The Quadpacer is an interval timer that has a short beep and pause
to remind you to brush the 4 sections of your mouth. Depending on
the brushing mode you have selected, the Quadpacer beeps at
different intervals during the brushing cycle. The Quadpacer works in
all 3 modes and at all 3 intensity levels (Fig. 10).
The Quadpacer feature on this type has been activated. To deactivate or
reactivate the Quadpacer feature:
1 Place the handle with a brush head attached on the plugged-in
charger or sanitiser.
2 Press and hold the mode button for 2 seconds.
,
You hear 1 beep to indicate the Quadpacer has been deactivated.
,
You hear 2 beeps to indicate the Quadpacer has been activated.
Smartimer
The Smartimer indicates that your brushing cycle is complete when
it automatically switches off the toothbrush at the end of the brushing
cycle. Dental professionals recommend brushing at least 2 minutes twice
a day.
Easy-start
The Easy-start feature gently increases power over the first 14 brushings
to ease into the Sonicare experience. The Easy-start feature only works in
the Clean mode and at the High intensity level.
This Sonicare type comes with the Easy-start feature deactivated.
To activate or deactivate the Easy-start feature:
1 Attach your brush head to the handle.
ENGLISH
12
4235_020_9724_1_Booklet_Simp_A6_v1.indd 12 17/04/15 14:54