Philips Sonicare CleanCare+ HX3214/02, Manual

Page: 13 / 20

Note: If you press the power on/off button after you started the
brushing cycle, the toothbrush will pause. After a pause of 30
seconds, the Smartimer resets.
Easy-start
The Easy-start feature gently increases power over the first
14 brushings to help you get used to brushing with the Philips
Sonicare toothbrush. This Philips Sonicare toothbrush comes with
the Easy-start feature activated.
Activating or deactivating the Easy-start feature:
Place the handle in the plugged-in charger.
-
To activate Easy-start:
Press and hold the power on/off button for 2 seconds.
You hear 2 beeps and the battery level indicator lights up green to
indicate that the Easy-start feature has been activated.
-
To deactivate Easy-start:
Press and hold the power on/off button for 2 seconds.
You hear 1 beep and the battery level indicator lights up yellow to
indicate that the Easy-start feature has been deactivated.
Note: Each of the first 14 brushings must last at least 1 minute to
move through the Easy-start ramp-up cycle properly.
Note: Use of the Easy-start feature beyond the initial ramp-up
period is not recommended and reduces the effectiveness of the
Philips Sonicare toothbrush in removing plaque.
Quadpacer
-
The Quadpacer is an interval timer that has a short beep and
pause to remind you to brush the 4 sections of your mouth evenly
and thoroughly. This Philips Sonicare toothbrush comes with the
Quadpacer feature
activated (Fig. 8) .
ENGLISH
13