Philips Sonicare AirFloss Ultra HX8431/02, Manual

Page: 13 / 26

Storage
If you are not going to use AirFloss Ultra for an extended period of
time, follow the steps below.
1 Open the cover of the reservoir and empty it.
2 Press the activation button until no more spray comes out of
the nozzle.
3 Unplug the charger.
4 Clean AirFloss Ultra nozzle, handle and charger. Refer to chapter
‘Cleaning’.
5 Store AirFloss Ultra in a cool, dry place away from direct sunlight.
Recycling
-
Do not throw away the product with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
Removing the rechargeable battery
Please note that this process is not reversible.
1 To deplete the battery, repeatedly press the activation button until
the AirFloss no longer produces any bursts of air. (Fig. 20)
2 Remove the AirFloss nozzle from the handle. (Fig. 21)
3 Firmly grab the handle with one hand at the top and one hand on
the bottom. (Fig. 22)
4 Snap the handle into two parts. (Fig. 23)
Note: This step requires a good amount of physical force.
The top and bottom half of the handle should be separated once
you snap the handle.
5 Remove the bottom half of the handle. (Fig. 24)
6 Cut all 6 wires on the internal component with scissors. (Fig. 25)
7 Completely pull apart the internal component from the top part of
the handle. (Fig. 26)
8 The battery is located inside the top half of the handle. Remove the
battery and dispose of it properly (not in household waste). (Fig. 27)
13
English
4235_020_9191_4_DFU-Luxury_A6_v6.indd 13 17/08/17 09:32