EN
47
Troubleshooting
This section describes common problems you may encounter and possible solutions
to them. The Wireless Router can be easily monitored through panel indicators to
identify problems.
Problem
Cause/Solution
I cannot browse to my
Your PC did not get an IP address from the Wireless Router.
Wireless Router
• Verify that your PC has an IP address.
Open a command box (Windows key ‘r’, type cmd, hit enter).
Type
ipconfig
.
Check that your gateway address is 192.168.1.2
Your PC can not communicate with your Wireless Router.
• Verify that you can communicate with the Wireless Router.
Open a command box.
Type ping 192.168.1.2
Response should be ‘Reply from 192.168.1.2: bytes=32 time=110ms TTL=32’
(time and TTL could be different)
My PC does not have/get an IP address
Network card is not configured to obtain an IP address automatically.
• Check if Network Interface Card (NIC) is in DHCP mode.
See chapter ‘Configure your PC’.
Network card speed does not match Wireless Router speed.
• Set network adapter to a fixed speed on your computer.
1 Click
Start
.
2 Click
Settings
.
3 Click
Network Connections
.
4 Select you network card. Right mouse click. Select
Properties
.
5 Click Configure.
6 Click
Advanced
tab.
Click Link Speed & Duplex.
Select a
Full Duplex
speed (either 100Mbps or 10Mbps)
Cable between PC and Wireless Router is not connected.
• Check Ethernet cable and lights on the Wireless Router.
Summary of Contents for SNK5600
Page 1: ...SNB6500 User manual 3 EN ...
Page 50: ......