Philips SK5.0L CA, Service Manual

Page: 6 / 54

Mechanical Instructions EN 6 SK5.0l CA 4.
4. Mechanical Instructions
Index of this chapter:
4.1 Set Disassembly
4.2 Assembly / Board Removal
4.3 Set Re-assembly
Note: Figures below can deviate slightly from the actual
situation, due to the different set executions.
4.1 Set Disassembly
Follow the disassemble instructions in described order.
4.1.1 Rear Cover Removal
Warning: disconnect the mains power cord before you remove
the rear cover.
1.
Remove all the fixation screws of the rear cover.
2. Now, pull the rear cover backwards and remove it.
Figure 4-1 Rear Cover removal
4.2 Assembly / Board Removal
4.2.1 Power Switch and Control Panel removal
1. From the mono carrier disconnect the main power and the
keyboard circuit cables. Release the main power cord and
the keyboard circuit cable from it’s strain reliefs.
2. Then, remove the six fixation screws [1] of the power
switch and control panel and remove the board.
Figure 4-2 Power Switch and Control Panel removal
H_17220_036.eps
280607
H_17230_027.eps
290607
1