Mechanical Instructions
4.
4.
Mechanical Instructions
Index of this chapter:
4.1 Set Disassembly
4.2 Assembly / Board Removal
4.3 Set Re-assembly
Note:
Figures below can deviate slightly from the actual
situation, due to the different set executions.
4.1
Set Disassembly
Follow the disassemble instructions in described order.
4.1.1
Rear Cover Removal
Warning:
disconnect the mains power cord before you remove
the rear cover.
1.
Remove all the fixation screws of the rear cover.
2.
Now, pull the rear cover backwards and remove it.
Figure 4-1 Rear Cover removal
4.2
Assembly / Board Removal
4.2.1
Side I/O Panel removal
Figure 4-2 Side-I/O panel removal
1.
Disconnect the sidepanel cable from the mono carrier and
remove the cable from it’s strain reliefs.
2.
Then, remove the two fixation screws (1) and remove the
board.
H_17210_032.eps
110607
H_17210_025.eps
130607
1
