Philips Showline SL SUNLED 10, User Manual

Page: 15 / 26

6
.
Master
/
Slave Operational Mode
The Master
/
Slave Operational Mode allows one SL SUNLED 10 LED Luminaire to act as the
"
Master
"
unit and all other connected units are controlled by this unit
.
When a unit is set to
"
Slave
"
mode
,
it will only listen
to and follow any commands sent from a
"
Master
"
unit
.
Only one
"
Master
"
unit is allowed in this type of operation
.
To setup a master
/
slave network
:
Step 1
.
Set the first device in the DMX512 chain to
M a ster Mode
through the unit’s menu system
.
Step 2
.
Set all other connected units to
S l a ve Mode .
Step 3
.
The master unit can be controlled via DMX512
,
R D M or through standalone operation
(
self
-
contained
network utilizing on
-
board effects
).
The slave units will mimic the master unit’s operation in all cases
.
Note
:
For SL SUNLED 10 LED Luminaire DMX Mapping
,
refer to
"
DMX CONTROL
"
on page 14.
Figure 10
:
SL SUNLED 10 LED Luminaire
-
Master
/
Slave Configuration
Master Unit Slave Unit Slave Unit
Installation & User’s Manual SL SUNLED 10 LED Luminaires
13
DMX512
DMX512
(
out from first
to second luminaire
)
DMX512
(
out to the next
luminaire or DMX512
controlled device
)
(
from
console or
control device
)