Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care
Printed in the Netherlands
© Copyright reserved
Subject to modification
Shaver
HQ8890
SENSOTEC
04/08
PRODUCT INFORMATION
General:
- Rechargeable / Main shaver
- Constant motor voltage
- Electronic push on/off
- Washable
Safety information
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Voltage
: 100 - 240 Volt 50 - 60 Hz
- Motor voltage
: 3,6 Volt
- Speed of cutters
: > 2100 r.p.m.
- Shaving heads
: HQ8 - 4222 036 05820
- Battery capacity indication : LCD
- Battery full indication
: LCD
- Battery low indication
: LCD + audible
- Charge indication
: LCD
- Battery
: AA pack NiMH (green)
- SAP coding
: HQ8890
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
Disassembly:
- Remove shaving unit, to prevent damages during
repairing.
- Remove screws A1 (2x).
- Take cover from housing (trimmer must be opened).
- Remove bracket large (17). (see fig. 1)
- The PCB-board can now be removed out of the housing.
- Remove the connecting strip from the motor by
dis soldering.
- Remove screws B1 (2 x), now the motor and hairchamber
can be removed out of the housing.
- Detach the motor springs (14) from the gearwheel unit
with a small screwdriver.
- For removing the LCD you need a torx screwdriver, set it
under the LCD bracket and turn the screwdriver. (see fig. 2)
Assembly:
- Think by assembly on the
hooks from the connecting
strip assy. (see fig. 3)
REPAIR INSTRUCTION
- No specific issues
OPTIONAL (accessories)
- No specific issues
fig. 3
fig.
1 fig.
2
