Philips sensiflex HX1507, Manual

Page: 3 / 9

◗
The brush attachment should also be replaced when
the bristles start to bend outwards.
You can obtain new brush attachments from the shop
in which you purchased the toothbrush.
All-round PHILIPS replacement brush attachments can
be used.
Environment
When you discard the appliance in due course, remove
the battery and dispose of it in an environmentally safe
way.
◗
NB: You can also hand the appliance in at a Philips
Service Centre, which will dispose of the battery for
you .
1 The battery must be completely empty when you
remove it. You should therefore let the appliance
run until it stops before removing the battery.
2 Pick up the charging unit and place the toothbrush
on the pin. Turn the toothbrush anti-clockwise to
unscrew the bottom of the toothbrush (fig. 15).
3 Turn the toothbrush upside down and press it
down on a hard surface to remove the battery
holder (fig. 16).
4 Open the lid of the battery holder by hand or by
means of a screwdriver (fig. 17).
5 Lift the battery out of the battery holder by
means of a screwdriver (fig. 18).
After the bottom has been unscrewed, the appliance
may not be watertight anymore and the guarantee will
become invalid.
Troubleshooting
If you are unable to solve your problem by means of
the troubleshooting guide below, please contact the
nearest Philips service centre, the Philips Customer
Care Centre in your country or contact us online at
www.philips.com.
Solution
Make sure that the plug of the
charging unit is properly connected
to the mains.
Make sure the socket is live (see
also the section 'Important').
Make sure the toothbrush is
switched off and recharge it for at
least 16 hours.
Check if the brush attachment has
been properly connected to
appliance (see also the section
'Using the appliance').
The toothbrush must be recharged.
If you normally leave the
toothbrush in the charging unit
continuously, you may have to
revive the battery as described in
the 'Charging' section.
Remove the brush attachment and
start using a new one.
Problem
The toothbrush
does not work at
all, although it has
been in the
charging unit
overnight.
The motor of the
toothbrush works,
but the brush head
doesn't.
The brushing
power of the
appliance has
greatly decreased.
The teeth-cleaning
performance of
the toothbrush is
not optimal
anymore.
Sensiflex power toothbrush 4203 000 30223
3/9