ACCLAIM FRESNEL AND PC
OPERATION MANUAL
IMPORTANT NOTE
: Before
discarding the packaging ensure
you have the suspension bolt set,
colour frame, lampbase spacers
&/or the lamp.
THANK YOU FOR PURCHASING A SELECON LUMINAIRE. WE HAVE DESIGNED THIS LUMINAIRE TO
PROVIDE YOU WITH A SUPERIOR FITTING IN PERFORMANCE, DESIGN AND ENGINEERING. WE ARE
CONFIDENT THAT IT WILL PERFORM TO YOUR EXPECTATIONS FOR MANY YEARS TO COME.
Before operating your new luminaire please read this information to assist you in making maximum use of your
luminaire, its maintenance and care.
If you would like further assistance contact your Selecon dealer or Selecon.
LAMPING YOUR LUMINAIRE
Before lamping – DISCONNECT THE LUMINAIRE FROM THE POWER SUPPLY. Be aware also that the
lamp or luminaire may still be hot, so exercise the necessary caution to avoid burns. Please note also
that these luminaires are not suitable for mounting on a normally flammable surface.
The Selecon Acclaim Fresnel and PC range is designed for use with either the T/25 500W or T/27 650W or the
FRK 650W lamp.
To fit the lamp:
♦
Release the clip fastener and swing down the rear door.
♦
Insert lamp taking care not to touch the quartz envelope with your fingers.
♦
Close door and lock off the fastener.
The luminaire should be at least 1.5m / 5ft away from the nearest object it is lighting.
© June 2009 All Rights Reserved