13
When the handset is off the base
station/charger, the bars indicate
the battery level (full, medium
and low).
When the handset is on the base
station/charger, the bars keep
scrolling until charging completes.
The empty battery icon flashes.
The battery is low and needs
recharging.
The handset turns off if the batteries are empty.
If you are on the phone, you hear warning
tones when the batteries are almost empty. The
call gets disconnected after the warning.
Set the country
To make the phone work, select your country.
1
When you see the welcome message,
press
[OK]
.
2
Select your country, press
[OK]
to
confirm.
The country setting is saved.
»
3
Set the date and time.
The phone is now ready to use.
»
To set the date and time later, press
»
[BACK]
to skip this setting.
Set the date and time
1
Press
MENU
.
2
Select
[CLOCK & ALARM]
>
[SET
DATE/TIME]
, then press
[OK]
to
confirm.
3
Press the numeric buttons to enter the
date, then press
[OK]
to confirm.
On the handset, the time set menu is
»
displayed.
a
The batteries are pre-installed in the
handset. Pull the battery tape off from
the battery door before charging.
b
Place the handset on the base station to
charge the handset. When the handset
is placed correctly on the base station,
your hear a docking sound.
The handset starts charging.
»
Note
If the handset becomes warm when the
•
batteries are being charged, it is normal.
Check the battery level
The battery icon displays the current battery
level.
English
EN
IFU_SE270-275_05_EN.indd 13
2010-1-21 11:47:03
