Philips SE171 Page 30 User Manual Download

Page: 30 / 36

13 Advanced

settings

Enhance the audio quality

XHD (Extreme High Definition) sound mode is

an exclusive feature which transmits high fidelity

signals to the handset. It makes the phone

conversations sound like real-life conversations.

When you are in standby mode,

Press

Select

[ADVANCED SET]

[XHD

SOUND]

, then press

to confirm.

Select

[ON]

[OFF]

, then press

confirm.

The setting is saved.

When you are in a call,

Press

to enter the options menu.

Change the XHD setting.

Press

to confirm.

The setting is saved.

You can register additional handsets to the base

station. The base station can register up to 4

handsets.

Auto registration

Place the unregistered handset on the

base station.

The handset detects the base station

and start to register automatically.
Registration is completed in less than 2

minutes. The base station automatically

assigns a handset number to the

handset.

Manual registration

If auto registration fails, register your handset

manually to the base station.

Press

on the handset.

Select

[ADVANCED SET]

[REGISTER]

, then press

to confirm.

Press and hold on the base station for

5 seconds.

Enter the system PIN. Press

BACK

make corrections.

Press

to confirm the PIN.

Registration is completed in less than 2

minutes. The base automatically assigns

a handset number to the handset.

Note

If the PIN is incorrect or no base is found

•

within a certain period, your handset displays

a notification message. Repeat the above

procedure if registration fails.

Note

The preset PIN is 0000. No change can be

•

made on it.

Unregister the handsets
1

If two handsets share the same base

station, you can unregister a handset with

another handset.

Press

Select

[ADVANCED SET]

[UNREGISTER]

, then press

to confirm.

Enter the system PIN. (The preset PIN

is 0000). Press

BACK

to remove the

number.

Select the handset number to be

unregistered.

Press

to confirm.

The handset is unregistered.

Summary of Contents for SE171




































Search results

Summary of Contents for SE171

Reviews:

Related manuals for SE171

Brands by name

Popular brands

Philips SE171, User Manual

Search results

Summary of Contents for SE171

Reviews:

Related manuals for SE171

Brands by name

Popular brands