background image

4

• 

Properly sealed against leaks at the 

installation site.

• 

Do not install your antenna on a wet or 

windy day.

• 

If the assembly starts to drop, get away 

from it immediately. Remember: the 

antenna, mast, cable, and metal guy wires 

are all excellent conductors of electrical 

current. Even the slightest touch of any 

of these parts to a power line can cause 

electrocution and death.

• 

If any part of the antenna system should 

come in contact with a power line, don’t 

touch it or try to remove it yourself. Call 

your local power company. They will 

remove it safely.

• 

If an accident occurs with the power 

lines, call for qualified emergency help 

immediately.

Notice for USA

This equipment has been tested and found 

to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable 

protection against harmful interference in a 

residential installation. This equipment generates, 

uses and can radiate radio frequency energy 

and, if not installed and used in accordance 

with the instruction manual, may cause harmful 

interference to radio communications.
However, there is no guarantee that 

interference will not occur in a particular 

installation. If this equipment does cause harmful 

interference to radio or television reception, 

which can be determined by turning the 

equipment off and on, the user is encouraged 

to try to correct the interference by one or 

more of the following measures:

• 

Relocate the receiving antenna.

• 

Increase the separation between 

equipment and receiver.

1 Important

Safety

This manual contains important information 

about the Philips indoor/outdoor television 

antenna. Read it carefully before you start the 

installation and setup.

For indoor use

• 

The product shall not be exposed to 

dripping or splashing and no objects filled 

with liquid, such as vases, shall be placed 

on the product.

• 

To completely disconnect the power 

input, the main plug of the product shall 

be disconnected from the main AC 

outlet.

• 

Where the main plug is used as the 

disconnect device, the disconnect device 

shall remain readily operable.

•  No naked flame sources, such as lighted 

candles, should be placed on the product.

For outdoor use

•  If this is the first time you install an 

antenna, for your own safety as well as 

others, seek professional assistance.

• 

Perform as many functions as possible on 

the ground.

• 

Select your installation site carefully. 

Remember: electric power lines and 

phone lines look alike. For your safety, 

assume that all overhead lines may cause 

fatal injury.

• 

Ensure that the installation site is 

structurally capable to support all loads 

(weight of the antenna, weight of ice, 

weight of snow and wind force). 

EN

Summary of Contents for SDV8622T/55















Reviews: