background image

8

Ensure the signal strength is good enough 

before you install the channels with the 

tuner.

5  Frequently 

asked questions

Can this antenna work with Analogue 

transmissions?

Yes, this antenna can receive analogue 

television broadcasts in the UHF and VHF 

bandwidths.

Can this antenna receive digital or work with 

ATSC broadcasts?

Yes, this antenna is designed to receive ATSC 

and HDTV broadcasts in the UHF & VHF 

bandwidths.

Can the antenna be powered by a DC power 

supply in a boat, RV or camper?

Yes, there is a DC power socket located at the 

back of the antenna. Plug your cable/adapter 

into the antenna and then into your power 

source.

Where should I place the antenna in order to 

get the best reception possible?

Choose a location near a window which gives 

the antenna a clear view of the transmitter.

Note

For best reception, place the antenna away from the 

 

metal surface to avoid interference.

How do I know how much gain (amplification) 

is required to receive a clear picture?

Once you have the VHF dipoles extended to 

the longest length, turn on the amplifier. Turn 

the amplifier up to the max position and then 

reduce as needed. In some case, you need to 

turn the amplifier down to receive a clearer 

picture. 

Can I set up this antenna with a digital tuner?

Yes, this antenna can be set up with a digital 

tuner. (see ‘Set up a digital tuner with this 

antenna’ on page 9)

 

Note

It is possible to switch the gain control level down for 

 

best reception.

Note

The UHF log periodic element only allows 90 

 

degrees rotation.

Set up a digital tuner with this 

antenna

You can install available channels with the digital 

TV tuner. This automatic process is part of the 

setup of the tuner. Ensure the antenna has 

set up properly before the tuner can receive 

viewable channels.
There are two ways to connect the antenna to 

the TV:

Connect the antenna to a digital tuner. 

• 

If the signal strength is good enough, the 

channels can be memorized in the tuner 

automatically .
Connect the antenna directly to the TV. 

• 

Tune to the analogue channels and find 

the best antenna location. Then re-

connect the antenna to the digital tuner. 

EN

Summary of Contents for SDV7120













Reviews: