7
English
Note
To check the distance from the local TV broadcast
•
transmitters to your location, visit www.antennaweb.
org for more information.
Set up a digital tuner with this
antenna
You can install available channels with the digital
TV tuner. This automatic process is part of the
setup of the tuner. Ensure the antenna has
set up properly before the tuner can receive
viewable channels.
There are two ways to connect the antenna to
the TV:
Connect the antenna to a digital tuner.
•
If the signal strength is good enough, the
channels can be memorized in the tuner
automatically .
Connect the antenna directly to the TV.
•
Tune to the analogue channels and find the
best antenna location. Then re-connect
the antenna to the digital tuner. Ensure the
signal strength is good enough before you
install the channels with the tuner.
2
Turn the TV to the desired channel/
station. Move the VHF rod antenna in
different directions up and down until the
reception is achieved.
For UHF reception
1
Turn the TV to the desired channel/
station.
2
Tilt or swivel the UHF loop antenna
towards the transmitter until the
reception is achieved.
EN
