Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT
17
Before assembling, make sure that your hands are clean and you have correctly washed and
sanitized the pump (see ‘Cleaning the Manual Breast Pump’ on page 16). Also check that
none of the pump components are damaged.
18
1
Insert the white valve into the pump body so that
it fits securely into the small round hole. Make
sure the pointed side of the valve is facing down.
2
3
Screw the pump body onto the milk
container until securely in place.
4
Insert the Let-down Massage Cushion and secure
the rim around the funnel making sure there are
no gaps. Run your thumb on the flat surface
between each petal to ensure there are no air
pockets.
(This is easier if assembled while the
Let-down Massage Cushion is wet.)
5
Place the forked end of the handle under
the rounded tip of the diaphragm stem.
Push down gently on the handle until it
clicks into place.
6
Click the pump cover onto the pump body.
Fit the silicone diaphragm with stem into the
pump body. Ensure a perfect seal around the
rim by pressing down with your fingers.
(This is
easier if assembled while the diaphragm is we
t.)
white stand
Assembling the Manual Breast Pump
Assembling the Manual Breast Pump
To ensure that the pump is completely
stable, you can use the stand with the
4oz/125ml milk container.
9977-iQUNO_USESFR_1030.qxd 30/6/08 16:50 Page 20
