Philips SCF283, Manual

Page: 6 / 80

6
Introduction
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that
Philips offers, register your product at www.philips.com/welcome.
General description (Fig. 1)
1 Lid
2 Clips
3 Basket
4 Base
5 Bottle cavities
6 Teat cavities
7 Dome cap holders
8 Slots for large bottles
9 Slots for breast pumps
Important
Read this user manual carefully before you use the microwave steriliser and save it for future
reference.
Warning
- Let the steriliser cool down before you remove it from the microwave. Be careful when you
move or open the steriliser, because the water in it can still be hot.
- Do not remove the lid from the steriliser immediately after sterilising, as the steam that comes
out is very hot. Let the steriliser cool down, as steam can cause burns.
- Only use water without any additives.
- Always make sure that the base is filled with water when you use the steriliser in the microwave.
- Do not put bleach or other chemicals in the steriliser.
- Do not place metal items in the steriliser, as this may cause damage to the microwave.
- Do not overload the steriliser, otherwise the items are not sterilised properly.
- Only sterilise baby bottles and other items that are suitable for sterilisers. Check the user
manual of the items you want to sterilise, to make sure they are suitable for sterilisers.
- This steriliser is intended for household use only.
Caution
- Children should be supervised to ensure that they do not play with the steriliser.
- Always make sure the base is filled with 200ml water before you start sterilising.
- After each use, pour any remaining water out of the steriliser after the water has cooled down.
- Always let the steriliser cool down before you store it.
- Always wash your hands before you touch the sterilised items.
- Do not expose the steriliser to extreme heat or direct sunlight.
- Do not place the steriliser on a hot surface.
- If you use a combination oven (with grill function), make sure that the oven or grill is switched
off and has cooled down before you put the steriliser in it.
Before first use
Before you use the steriliser for the first time, clean it thoroughly as described below.
1 Remove the basket from the base.
2 Fill a baby bottle or a measuring cup with exactly 200ml tap water and pour this into the
base (Fig. 2).
ENGLISH