BEEP
PHILIPS SBT30
BEEP
User manual
内蔵リチウムポリマーバッ
テリー
3.7V 500mAH
バッテリー動作時間
約
8
時間（満充電時）
充電時間
約
2.5
時間
本体寸法（直径
x
高さ）
直径
56mm x
高さ
80mm
本体重量
0.15 kg
EN
1 Important
Safety
Important Safety Instructions
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
•
Do not install near any heat sources such as radiators, heat registers,
stoves, or other devices (including amplifiers) that produce heat.
•
Only use attachments/accessories specified by the manufacturer.
•
Refer all servicing to qualified service personnel. Servicing is required
when the device has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen
into the device, the device has been exposed to rain or moisture,
does not operate normally, or has been dropped.
•
Devices shall not be exposed to dripping or splashing.
•
Do not place any sources of danger on the device (e.g. liquid filled
objects, lighted candles).
Warning
•
Never remove the casing of this apparatus.
•
Never lubricate any part of this apparatus.
•
Never place this apparatus on other electrical equipment.
Notice
Any changes or modifications made to this device that are not expressly
approved by Philips Consumer Lifestyle may void the user’s authority to
operate the equipment.
Disposal of your old product
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a
product it means that the product is covered by the European
Directive 2002/96/EC.
Please inform yourself about the local separate collection
system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old
products with your normal household waste. Correct disposal of your
old product helps to prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the European
Directive 2006/66/EC, which cannot be disposed with normal
household waste.Please inform yourself about the local rules
on separate collection of batteries because correct disposal
helps to prevent negative consequences for the environmental and
human health.
Always bring your product to a professional to remove the built-in battery.
Environmental information
All unnecessary packaging has been omitted. We have tried to make
the packaging easy to separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused
if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, exhausted
batteries and old equipment.
Note
•
The type plate is located on the bottom of the apparatus.
2
Your Bluetooth Speaker
Congratulations on your purchase, and welcome to Philips! To fully
benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
Introduction
With this speaker, you can enjoy audio from the compatible Bluetooth
device or your PC/ Mac.
3
Get started
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number
of this apparatus. The model number and serial number are on the
bottom of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Power supply
The speaker can operate on built-in rechargeable battery.
To recharge the built-in battery:
Connect micro USB socket(
) with PC through supplied USB cable.
»
The power indicator(
) turns on. (red)
•
The power indicator turns off when it’s fully charged.
The hook
The carabiner(
) is used for easy carrying or hanging, not for climbing
support or fall protection.
4 Play
Play from a Bluetooth device
Note
•
The effecitve operation range between the speaker and your
Bluetooth device is approximately 10 meters (30 feet).
a
b
c
f
d e
g
1
Slide (
) towards
to select Bluetooth audio source.
»
The Bluetooth indicator(
) flashes.(Blue)
2
Activate the Bluetooth function in your Bluetooth device.
3
Select “PHILIPS SBT30” on your Bluetooth device for pairing.
»
The speaker beeps twice and the Bluetooth indicator(
) stays
steadily on.(Blue)
•
For some devices, you may need to input “0000” as pairing
password.
4
Start music play on your Bluetooth device.
When there is an incoming call:
•
Press Bluetooth button(
) to pick up the call.
•
Press Bluetooth button(
) again to hang up the call.
Tip
•
You can speak to the MIC(
) to get the best speakerphone
performance.
Play from an external device
1
Slide (
) towards
AUX
to select Aux-in audio source.
»
The power indicator(
) turns white.
2
Connect your speaker with an external device throught the supplied
USB cable.
3
Start music play on your device.
5
Product information
Note
•
Product information is subject to change without prior notice.
Specifications
Amplifier
Rated Output Power
2W RMS
Signal to Noise Ratio
>70dB
Aux-in Link
600 mV RMS, 10 kohm
Bluetooth
Bluetooth specification
V2.1
Supported Profiles
HFPv1.6, AD2Pv1.2, HSPv1.2
Advanced features
Echo and noise cancellations
Range
10 m/33 feet line of sight
General information
DC power input
USB: 5V, 500mA;
Built-in Li-Polymer battery
3.7V 500mAH
Battery working time
>8 hours
Charging time
2.5 h
Dimensions-Main Unit
(diameter x height)
D56mm * H80mm
Weight- Main Unit
0.15 kg
5
製品情報
注
•
製品情報は予告なく変更されることがあります。
仕様
アンプ
定格出力
2W RMS
信号対雑音比（
SN
比）
>70dB
Aux-in
リンク
600 mV RMS
、
10 kohm
Bluetooth
Bluetooth
仕様
V2.1
対応プロファイル
HFPv1.6
、
AD2Pv1.2
、
HSPv1.2
その他機能
エコー／ノイズキャンセリング
有効範囲
見通し距離
10 m
（
33
フィート）
一般情報
DC
電源
USB
：
5V
、
500mA
