background image

ENGLISH

4

Your baby monitor

SBC SC486

Philips is dedicated to producing caring, reliable products that new moms
and dads really need. Products whose reliability and operating quality bring
reassurance.You can trust this Philips baby monitor to provide round-the-
clock support by ensuring you can always hear your baby clearly, no matter
where you are in the house.The 100% Digital DECT 'cordless telephone
technology' guarantees you hear only your own baby without any distracting
noise.

Philips Baby Care,Taking care together

Important information

Please read this guide carefully before using the baby monitor, and keep it
for future reference.This baby monitor is intended as an aid. It is not a
substitute for responsible and proper adult supervision and should not be
used as such.

• Make sure the Baby Unit and adapter cable are always out of reach of the

baby, at least one metre away.

• Never place the Baby Unit inside the baby ’s bed or playpen!
• Never cover the baby monitor (with a towel, blanket, etc.).
• Clean the baby monitor with a damp cloth.
• Never use the baby monitor near water.

Dispose of used batteries in an environmentally friendly manner.

Safety precautions

• Check if the voltage indicated on the type plate of the adapters

correspond to the local mains voltage before connecting to the mains
power supply.

• Do not use the set in moist places or close to water.
• Do not expose the set to extreme heat or light (eg. direct sunlight).
• To prevent electric shock, do not open the cabinets of the Baby Unit,

Parent Unit and charger.

• Avoid metallic contact (e.g. metal clips, keys) between the battery

contacts and the contacts in the charging base.

• Risk of explosion if battery is replaced by an incorrect type.

Never use non-rechargeable batteries for the parent unit.

• NiMH batteries must be disposed of in accordance with applicable waste

disposal regulations.

SC486_book.qxd  23-09-2004  18:22  Pagina 4

Summary of Contents for SBCSC486/85



















Reviews: