Wireless TV link
SBCVL1200/05
Technical specifications
Product highlights
Date of issue 2005-12-27
Version: 4.0
12 NC: 9082 100 00089
EAN: 87 10101 64158 4
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
© 2005 Koninklijke Philips Electronics N.V.
All Rights reserved.
www.philips.com
Tuner / Reception / Transmission
•
Antenna location:
Picture & sound: Internal, RC
extender: External
•
Frequency range:
picture&sound:2.4GHzRC
extender:433MHz MHz
•
TV system:
PAL, SECAM
•
Typical range indoor:
15-30 m
•
Typical range outdoor:
100 m
• Remote control extender
•
Supported IR carrier frequency:
32-40 KHz
Accessories
•
AC/DC adaptor:
2x 9VDC, 300mA
•
SCART duplicator:
2 pcs on transmitter
Dimensions
•
Receiver dimensions (W x H x D):
204 x 65 x 168 mm
•
Temperature (operation):
5º to 35º Celsius
•
Transmitter dimensions (W x H x D):
204 x 65 x 168 mm
Power
•
Power consumption:
7 W
•
Power supply:
AC/DC Adapter, 220-240V
Transmitter
•
SCART 1:
CVBS in, Audio L+R in
•
SCART 2:
CVBS in, Audio L+R in
Receiver
•
SCART out:
CVBS out, Audio L+R out
•
Watch any device on a 2nd TV
The wireless link uses standard SCART and cinch plugs
that are used by almost every brand of audio/video
devices. If you device has one of these standard
connectors it works with the wireless link
Connect 2 devices
The easy way to switch between any two devices
without having to reconfigure your entire home cinema
set-up. The wireless TV link has two separate inputs,
each with its own SCART connector, enabling you to
connect two A/V source devices at the same time.
Works with DVD and many more
Extend your possibilities for viewing movies, sports
events, live performances and a range of TV channels
anywhere in your home. The wireless TV link is suitable
for transmission of AV content of all brands of PayTV
and Pay-per-View decoders, satellite receivers, set-top
boxes, DVD players, VCRs and camcorders.
Works on almost all brands
The wireless link uses standard SCART and cinch plugs
that are used by almost every brand of audio/video
devices.
Operates in closed cabinet
If you store your audio/video devices in a cabinet, you
cannot operate these devices with a normal IR remote
control. The Philips wireless remote control link allows
you to operate these devices with the cabinet doors
closed thanks to an RF-based link that picks up the
infrared signals of a remote control and translates them
into RF. The receiver unit then translates them back to
IR.
One touch access to 2 devices
There's no need to swap cables at the transmitter to
view any video device on the second TV. Simple press
the input selection button to switch from input device.
Wireles means no drilling
A 2.4 GHz wireless link between the receiver and
transmitter means you don't have to lay cables or drill
holes through walls.
Wireless goes through walls
There's no need to buy or rent duplicate A/V equipment.
The wireless RF system extends your possibilities for
viewing DVD movies and your favourite Satellite or TV
channels anywhere in your home. With a range of up to
30 meters inside the house, it delivers high-quality video
and stereo audio no matter where your second TV is
located.
