ENGLISH
5
Getting your baby monitor ready
1
Position the Baby unit at least one metre away from your baby.
Never place the baby unit inside the baby’s bed or playpen.
2
Set channel selection switches to the same channel on both units.
3
Connect the power adapter to Baby unit socket.
4
Plug the power adapter into mains supply.
5
Move away from the Baby unit with the Parent unit.
If units are positioned too close to each other then a high-pitched noise
can be heard
6
Connect the second power adapter to the Parent unit’s charging base
socket.
7
Plug the second power adapter into a mains supply.
8
Place the Parent unit inside its charging base.
> The red charging light lights.
9
Leave the Parent unit in charging base for at least 14 hours to fully charge
the batteries.
When batteries are fully charged, the Parent unit can be used cordlessly for
up to 12 hours.
10
Place the Parent unit inside the charging base when power light on the
Parent unit flashes green (an indication that batteries are low).
A
B
C
D
C
H
A
N
N
EL
DC 9V
D
C
9
V
SYSTEM CHECK
LEVE L
CHARGE
XP SBC SC 468 book 18-09-2003 13:10 Pagina 5
