2
3
2
ENGLISH
1
2
3
4
5
6
7
8
9
10
1
2
3
Getting your baby monitor ready
Position the Baby unit at least one metre away from your baby.
Never place the baby unit inside the baby’s bed or playpen.
Set channel selection switches to the same channel on both units.
Connect the power adapter to Baby unit socket.
Plug the power adapter into mains supply.
Move away from the Baby unit with the Parent unit.
If units are positioned too close to each other then a high-pitched noise
can be heard.
Connect the second power adapter to the Parent unit’s charging base
socket.
Plug the second power adapter into a mains supply.
Place the Parent unit inside its charging base.
> The red charging light lights.
Leave the Parent unit in charging base for at least 14 hours to fully
charge the batteries.
When batteries are fully charged, the Parent unit can be used cordlessly for
up to 12 hours.
Place the Parent unit inside the charging base when power light on the
Parent unit flashes red (an indication that batteries are low).
Using your baby monitor
Listening to your baby
Push the power button on the Baby unit to turn it on.
> The power light lights (green).
Set the mode switch on the Baby unit to MONITOR
Switch the Parent unit on and adjust the volume to level you prefer using
the VOLUME ON/OFF control.
The digital SYSTEM CHECK light lights continuously (green) when the
Parent unit and Baby unit are in touch with each other.
Your baby monitor
SBC
SC467
ENGLISH
Product illustration on
inside flap:
•
•
•
•
•
Important information
Please read this guide carefully before using the baby monitor, and keep it
for future reference. This baby monitor is intended as an aid. It is not a
substitute for responsible and proper adult super vision and should not be
used as such.
Make sure the Baby unit and adapter cable are always out of reach of the
baby, at least one metre away.
Never place the Baby unit inside the baby’s bed or playpen!
Never cover the baby monitor (with a towel, blanket, etc.).
Clean the baby monitor with a damp cloth.
Never use the baby monitor near water.
A
B
C
D
C
H
A
N
N
EL
TA
LK
D
C
9
V
DC 9V
SYSTEM CHECK
LEVEL
CHARGE
POWER
OP
EN
- S
EN
SI
TI
VI
TY
+
4
3
5
-
V
O
LU
ME
+
4
3
5
A
B
C
D
C
H
A
N
N
EL
O
FF
O
N
V
O
LU
M
E
Philips is dedicated to producing caring, reliable products that new moms
and dads really need. Products whose reliability and operating quality bring
reassurance.
B
13
14
15
16
17
18
19
20
21
22
23
24
25
26
A
1
2
3
4
5
6
7
8
9
10
Baby unit
night light
talk button
loudspeaker
DC power supply socket
power button
power light
channel selection switch
microphone
AC power adapter
Mode switch
-
MONITOR
- INTERCOM
Parent unit
sound-level lights
microphone
talk button
system check light
charging base
AC power adapter
power light
volume control - on/off switch
channel selection switch
loudspeaker
charging light
battery compartment cover
DC power supply socket
system check alarm switch
11
12
loudspeaker volume control
battery compartment cover
You can leave the Parent unit in the charging base
.
•
Radio equipment for wireless applications is not protected against
disturbance from other radio services.
Remove the battery-pack from the Parent unit if it is not used for long periods.
