Philips SBC RU 510, User Manual

Page: 3 / 108

To switch on teletext.
To enlarge the teletext display on screen.
To stop changing teletext pages.
To switch off teletext.
If you use the memory out key ( fi ) to access the next
teletext page on your Philips TV, see Troubleshooting .
Fasttext
Red
Green
Yellow
Blue
SET-UP FOR USE
A
D V I C E
Carefully read the complete procedure before starting!
Your TV is a Philips brand:
1
Press the power key to test.
– The green LED lights up to confirm transmission.
C
H E C K
Press a few keys to check correct response.
If response is not correct, go to the next paragraph.
Your TV is of another brand, or your TV is a
Philips brand, but not all keys respond
correctly:
1
Look up the brand name of the TV you want to operate in
the code list (centre of this manual).
2
Make sure the TV is switched on.
3
Press and hold keys 1 and 3 simultaneously - for about
three seconds- until the green LED lights up. (Release the
keys: the green LED should stay on)
4
Enter your 4-digit code using the number keys, within
30 seconds.
– The green LED flashes twice.
C
H E C K
That’s it! Press a few keys to check correct response. If
response is not correct, repeat procedure beginning at step 1,
using the next 4-digit code in the codelist.
N
O T E
- If the LED displays one long flash, the code was not
recognised. Please go back to step 1 and repeat the
procedure, using the next 4-digit code in the list.
- If no key is pressed within 30 seconds, you have to start
again at step 1.
- If no correct code is in the list, go to the next paragraph.
Instructions for use
3
English
9 - 0
1 3
SHIFT
SHIFT
SHIFT
SHIFT