Philips Satinelle Ice Premium HP6517, User Manual

Page: 10 / 144

When you use the appliance for the first time, we advise you to try
it out on an area with only light hair growth. This helps you get
accustomed to the epilation process.
For optimal epilating results, the hairs should not be longer than 10
millimetres (Fig. )
To epilate longer hairs: (Fig. )
shorten the hairs to a maximum length of 10mm with a trimmer. In
this case, you can start to epilate right away.
shave the hairs completely. In this case you can start to epilate after a
few days (the hairs must be at least 0.5mm long).
Your skin may become a little red and irritated the first few times
you use the epilator. This phenomenon is absolutely normal
and quickly disappears. As you use the appliance more often, your
skin gets used to epilation, skin irritation decreases and
regrowth becomes thinner and softer. If the irritation has not
disappeared within three days, we advise you to consult a doctor.
We advise you to epilate before you go to bed at night, as
this allows any skin irritation that may develop to diminish
overnight.
corded use
You can also use the appliance from the mains. However, to avoid
damage to the batteries, only use the appliance from the mains when
the batteries are empty.
1 To run the appliance from the mains when the batteries are empty,
switch off the appliance and connect it to the mains. Wait a few
seconds before you switch on the appliance.
Epilating with the leg skin cooler
Only use the leg skin cooler to epilate your legs.
Make sure your skin is clean, entirely dry and free from grease. Do not
use any cream before you start to epilate.
1 Slide the insulating sleeve onto the skin cooler. (Fig. )
,
,
,
-
-
,
,
EnglisH
10