Philips SalonDry AC Lite HP4997/01, Manual, Page: 11 / 72

troubleshooting
If problems arise with your hairdryer and you cannot solve them with the
information below, please contact the nearest Philips service centre or
the Philips Consumer Care Centre in your country.
Problem Cause Solution
The
appliance
does not
work at all.
Perhaps the socket to
which the appliance
has been connected is
not live.
Make sure the socket is live.
The appliance may
have overheated and
the heat function was
switched off
automatically.
Unplug the appliance and let it
cool down for a few minutes.
Before you switch on the
appliance again, check the
grilles to make sure they are
not blocked by fluff, hair etc.
The appliance may not
be suitable for the
voltage to which it has
been connected.
Make sure that the voltage
indicated on the type plate of
the appliance corresponds to
the local mains voltage.
The mains cord of the
appliance may be
damaged.
If the mains cord is damaged,
you must have it replaced by
Philips, a service centre
authorised by Philips or
similarly qualified persons in
order to avoid a hazard.
EnglisH
11