Philips Saeco Royal HD8838, Service Manual

Page: 42 / 52

SYNTIA CAPPUCCINO 07 DISASSEMBLY
Saeco International Group Page / 09
05
7.6 Gearmotor
2
A
B
D
E
F
C
4
H
L
3
B
P
1
1 ) Loosen the screws of the boiler pin, remove it and
loosen the others shown.
2 ) The following are located inside the compartment
protected by the casing:
- The electric motor (A) with gears (B) and (C) for
transmission and timing of the dispensing unit.
- The dreg drawer presence sensor (D).
- The dispensing unit presence microswitch (E).
- The microswitch (F) that detects the idle phase of
the dispensing unit as well as that of the dispensing
process.
- Remove the gear (C) that engages with the motor
transmission shaft.
- Remove the large gear (B).
- Remove the motor (A) complete with the
transmission shaft.
3 ) Reconnect the gear (B), making sure that the
arrow is aligned with the opening that contains the
pin (P).
4 ) When re-mounting the motor and the
transmission shaft, make sure the guides (L) are
inserted in the correct housing.
Grease the shaft thoroughly and evenly.