The machine grinds the
coffee beans, but coffee
does not come out.
The grind is set too fine.
Adjust the grinder to a coarser setting.
The brew group is dirty.
Clean the brew group.
The coffee dispensing spout is
dirty.
Clean the coffee dispensing spout and its
holes with a pipe cleaner.
The coffee exit duct is blocked.
Clean the coffee exit duct with the
handle of the multifunctional tool or a
spoon handle.
The coffee comes out
slowly.
The grind is ground too finely.
Change the grinder to a coarser setting.
The brew group is dirty.
Clean the brew group.
The coffee exit duct is blocked.
Clean the coffee exit duct with the
handle of the multifunctional tool or a
spoon handle.
The machine circuit is blocked by
limescale.
Descale the machine.
The milk does not froth.
The automatic milk frother is dirty
or not assembled or installed
correctly.
Clean the automatic milk frother and
make sure it is correctly assembled or
installed.
The type of milk used is not
suitable for frothing.
Different types of milk result in different
amounts of froth and different froth
qualities. Semi-skimmed or full-fat cow's
milk give good results.
The AquaClean filter
cannot be activated as the
tick does not appear on the
display.
A filter has just been activated.
You have to dispense at least 10 cups
(of 100ml each) before you can activate
a new filter. Be careful as you activate a
new filter, the filter counter will increase
automatically.
The filter cannot be
activated and the machine
asks for descaling.
You have already replaced 8
AquaClean filters. After 8 filter
replacements you need to descale
the machine.
Descale your machine first and install the
filter.
The filter has not been replaced in
time after the AquaClean water
filter signal started flashing.
Descale your machine first and install the
filter.
34
English
Summary of Contents for Saeco PicoBaristo HD8924
Page 2: ...English Deutsch 5 38 ...
Page 75: ......
