Philips Saeco Moltio, Service Manual

Page: 39 / 66

MOLTIO 05 SERVICE MODE
8/13
Firmware Software version
Firmware Version “xx.xx.xx”
The machine model “CAPP.” or “PANN.”
The “120” text for 120V models or the “230” text for 230V models .
The frequency of the main supply “50HZ” or “60HZ”
Strart condition
ERROR : The letters do not change from N to Y or are always Y; check the interface board and the
flat cable (JP21). During themovement the backlight remain green; check the wiring (JP4) from
the interface board and the display.
Press buttons from 1 to 6
When and only when a button is pressed the letter beside change
from N to Y.
Pressing button 1, 3 ,4, 6 the backlight color changes from GREEN
to RED.
Pressing buttons 2, 5 the backlight color changes from GREEN to
YELLOW.
Note: Press button 4 as the last once, since it makes change the
test page.
Operational check – keys
Press AROMA to move to the next screen
Press AROMA to move to the next screen
Start condition
Insert the Dreg Drawer
The indication DREG change from “N” to “Y”
ERROR
: The indication DREG does not change; check the
Microswitch for the drag drawer and the wiring (JP16)
Insert a full Water Tank
The indication H20 changes from “N” to “Y”.
NOTE: the switching from “N” to “Y” requires about 1-2 seconds
ERROR : The indication TANK-H2O doesn’t change; check the
capacitive sensor (fixing) and the wiring (JP23)
Operational check microswitches and sensors