Philips Saeco INCANTO HD8919, User Manual

Page: 34 / 72

The type of milk used is not suitable
for frothing.
Different types of milk result in
different amounts of froth and
different froth qualities. We have
tested the following milk types
which proved to deliver a good
milk froth result: semi-skimmed or
full-fac cow's milk, soy milk and
lactose-free milk. Other types of
milk have not been tested and
may result in a small amount of
milk froth.
The AquaClean filter
cannot be activated as the
tick does not appear on
the display.
A filter has just been activated. You have to dispense at least
cups of ml each before
you can activate a new filter. Be
careful as you activate a new filter,
the filter counter will increase
automatically.
The filter cannot be
activated and the
machine asks for
descaling.
You have already replaced
AquaClean filters. After filter
replacements you need to descale
the machine.
Descale your machine first and
install the filter.
The filter has not been replaced in
time after the AquaClean water filter
signal started flashing.
Descale your machine first and
install the filter.
The filter has not been installed
during first installation but after
having brewed approx. coffees
based on ml cups . The machine
has to be completely limescale-free
before installing the AquaClean filter.
5irst descale the machine and
then install a new AquaClean filter.
After descaling, the filter counter is
reset to / . Always confirm filter
activation in the machine menu,
also after filter replacement
The AquaClean filter was not
correctly activated during first
installation.
5ollow the instructions on the
display until you receive
confirmation that the filter has
been activated.
The AquaClean filter is
installed, but the
descaling message
appears.
After filter replacements, you need
to descale the machine
5irst descale the machine and
then install a new AquaClean filter.
This will reset the filter counter to
/ . Always confirm filter
activation in the machine menu,
also after filter replacement.
The descaling message
appears before filters
were replaced.
You did not activate the AquaClean
filter correctly during first installation.
5irst descale the machine and
then install a new AquaClean filter.
Always activate the filter in the
machine menu.
You placed the AquaClean filter after
having used the machine for a while.
You did not activate the replacement
filter in the machine menu.
You did not replace the filter when
the filter symbol started flashing.
English