English
3
Press the length selector and then push it to the
left or right to select the desired hair length
setting.
4
Switch on the appliance.
5
Move the appliance upwards while you exert
gentle pressure. Make sure the front of the
comb is in full contact with the skin.
6
Clean the attachment after use (see 'Cleaning
and maintenance').
Using the beard styler attachment without
comb
(S9732/33, S9731/33 only)
You can use the beard styler attachment without
the comb to contour your beard, moustache,
sideburns or neckline to a length of 0.5mm.
1
Pull the comb off the beard styler attachment.
Note: Grab the comb in the center to pull it off
the beard styler attachment. Do not pull at the
sides of the comb.
2
Switch on the appliance.
3
Hold the beard styler attachment perpendicular
to the skin and move the appliance downwards
while you exert gentle pressure.
4
Clean the attachment after use (see 'Cleaning
and maintenance').
2
1
46
