Philips S8980, Manual

Page: 24 / 42

Problem Possible cause Solution
To clean the shaving heads
thoroughly, remove the
shaving heads from the
shaving head holder one
by one . Then separate the
cutter from its guard and
rinse each matching set
under the tap. After rinsing,
place the cutter back into
its corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder .
I replaced
the shaving
heads, but the
replacement
reminder is still
showing.
You have not reset
the appliance.
Reset the appliance by
pressing the on/off button
for approx. 7 seconds .
A shaving
head symbol
has suddenly
appeared on the
display.
This symbol is
a replacement
reminder.
Replace the shaving heads
(see 'Replacement ') .
Water is leaking
from the bottom
of the appliance.
During cleaning,
water may collect
between the inner
body and the
outer shell of the
appliance.
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
English
24