3
Rinse the hair chamber and shaving head
holder under the tap.
4
Remove the shaving heads. For detailed
instructions, see 'How do I replace the shaving
heads?.'
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally put a cutter in the wrong
shaving guard, it may take several weeks before
optimal shaving performance is restored.
5
Clean the cutter and guard under the tap.
6
Shake off excess water.
7
Put the shaving heads back into the shaving
unit. For detailed instructions, see 'How do I
replace the shaving heads?.'
8
Insert the hinge of the shaving head holder into
the slot in the top of the shaving unit and close
the shaving unit.
Cleaning the pop-up trimmer
Clean the trimmer after each use to prevent
clogging and damage.
Never dry the trimmer teeth with a towel or
tissue, as this may damage the trimmer teeth.
1
Make sure that the appliance is switched off
and disconnected from the wall socket.
2
Push the trimmer release slide down to open
the pop-up trimmer.
23
English
Summary of Contents for S7786
Page 1: ...S7786 ...
Page 2: ...3 1 2 4 5 6 7 10 11 12 13 8 9 ...
