Philips RQ1297/23, User Manual

Page: 11 / 142

Replace shaving unit
For maximum shaving performance, we advise you
to replace the shaving unit every two years.
- To remind you to replace the shaving unit,
the appliance is equipped with a replacement
reminder which is activated automatically after
approx. two years. The replacement reminder is
repeated with a beep and will reset at
3 successive shaves or until you reset the shaver.
Power-saving mode
The appliance is equipped with an automatic power-
saving mode. When the shaver enters the power-
saving mode, the light in the on/off button goes out
to save energy.
- When the appliance is switched off but detects
movement for 5 minutes (for instance when you
are travelling with the shaver in your suitcase), it
automatically goes into power-saving mode. This
mode prevents the shaver from being switched on
by accident.
,
The lock symbol flashes on the display to indicate
that the appliance is in power-saving mode.
- To deactivate the power-saving mode, simply press
the on/off button.
Blocked shaving heads
- If the shaving heads are blocked, the shaving unit
symbol, the tap symbol and the exclamation mark
flash. In this case, the motor cannot run because
the shaving heads are soiled or damaged.
- When this happens, you have to clean the shaving
unit or replace it.
- The shaving unit symbol, the tap symbol and
the exclamation mark continue to flash until you
unblock the shaving heads.
MINUTES LEFT
MINUTES LEFT
MINUTES LEFT
MINUTES LEFT
ENGLISH
11