1
Pull the shaving unit straight off the shaver.
Note: Do not twist the shaving unit while you pull it off the shaver.
2
Pull open the three shaving heads one by one.
3
Press the retainer release tab (1) until the retainer opens (2).
Note: Do not clean more than one cutter and shaving guard at a time, since
they are all matching sets. If you accidentally put a cutter in the wrong shaving
guard, it may take several weeks before optimal shaving performance is
restored.
4
Remove the cutter from the shaving guard.
5
Clean the cutter with the cleaning brush supplied.
1
2
6
Clean the inside of the shaving guard.
7
After cleaning, place the cutter back into the shaving guard with the
cutter legs pointing downwards.
8
Press down the retainer over the cutter.
9
Close the shaving heads.
10
Insert the lug of the shaving unit into the slot in the top of the shaver
(1). Then press the shaving unit downwards (2) to attach it to the
shaver (‘click’).
Cleaning the trimmer
Clean the trimmer every time you have used it.
1
Slide the trimmer slide forwards to slide out the trimmer.
2
1
English
English
