Problem
Possible cause
Solution
The shaving head
holder is soiled or
damaged to such an
extent that the motor
cannot run.
Clean the shaving head
holder or replace it
(see chapters ‘Cleaning
and maintenance’ and
‘Replacement’).
The temperature of
the shaver is too high.
In this case, the shaver
does not work.
Let the shaver cool
down. As soon as the
temperature of the shaver
has dropped sufficiently,
you can switch on the
shaver again.
RQ1175A/26
only: The shaver
is not entirely
clean after I clean
it in the Jet Clean
System.
The cleaning fluid in
the cleaning chamber
is soiled.
Empty and rinse the
cleaning chamber and
refill it with new cleaning
fluid.
The cleaning fluid
level is too low. If the
fluid volume in the
cleaning chamber
drops below the
minimum level during
the cleaning program,
the program aborts.
The cleaning light and
the ‘cleaning chamber
empty’ symbol flash
at intervals and the
holder returns to its
starting position.
Refill the cleaning
chamber with cleaning
fluid to a level between
the two lines (see
chapter ‘Cleaning and
maintenance’).
ENGLISH
54
