Problem
Possible cause
Solution
The cleaning fluid level
is too low. If the fluid
volume in the cleaning
chamber drops below
the minimum level
during the cleaning
program, the program
aborts.The cleaning
light and the ‘cleaning
chamber empty’ symbol
flash at intervals and
the holder returns to its
starting position.
Refill the cleaning
chamber with cleaning
fluid to a level between
the two lines (see
chapter ‘Cleaning and
maintenance’).
You have used another
cleaning fluid than the
original Philips cleaning
fluid.
Only use HQ200
Philips Cleaning Fluid.
RQ1187/37 only:
The Jet Clean
System does not
work when I
press the on/off
button.
The Jet Clean System
is not connected to the
mains.
There is no electrical
connection between the
Jet Clean System and
the shaver.
Press the shaver tightly
into the holder to lock
it into place.
ENGLISH
59
