Philips RQ1151, User Manual

Page: 42 / 60

charging in the Jet clean system (RQ1195 only)
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder with the
back of the shaver pointing towards the holder.
Note: RQ1180 only: when you turn the shaver upside down, the
battery indication on the display is also turned upside down so
you can still see to what level the battery is charged.
4 Place the shaver body in the holder behind the two clips
(1) and press it down until it locks into place (2).
Note: The shaver cannot be placed in the Jet Clean System when
the protection cap is on the shaving unit or when the trimmer is
placed on the shaver.
,
The display shows that the shaver is charging (see
chapter ‘The display’).
using the shaver
shaving
skin adaptation period
Your first shaves may not bring you the result you expect and
your skin may even become slightly irritated. This is normal.
Your skin and beard need time to adapt to any new shaving
system.
We advise you to shave regularly (at least 3 times a week)
for a period of 3 weeks to allow your skin to adapt to the
new shaver. During this period, use your new electric shaver
exclusively and do not use other shaving methods. If you use
different shaving methods, it is more difficult for your skin to
adapt to the new shaving system.
1 Press the on/off button once to switch on the shaver.
,
RQ1195/RQ1175: The display lights up for a few
seconds.
english
42