Philips RQ1150/16, Manual

Page: 8 / 54

- Never use water hotter than 80°C to rinse the
shaver.
- Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
- Water may leak from the socket at the bottom
of the shaver when you rinse it. This is normal
and not dangerous because all electronics are
enclosed in a sealed power unit inside the shaver.
- Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol
or acetone to clean the shaver, the charger and
the Jet Clean System (specific types only).
- Use, charge and store the shaver at a temperature
between 5°C and 35°C.
- Always put the protection cap on the shaver
to protect the shaving heads when you are
travelling.
- Only use the adapter, the charger and the
accessories supplied.
- The adapter transforms 100-240 volts to a safe
low voltage of less than 24 volts.
- Do not use the shaver, the Jet Clean System, the
charger or the adapter if it is damaged.
- If the adapter or charger is damaged, always have
it replaced with one of the original type in order
to avoid a hazard.
Jet Clean system (specific types only)
Caution
- Only use the Jet Clean System with the original
HQ200 cleaning fluid.
- Always place and use the Jet Clean System on a
stable, level and horizontal fluid-resistant surface
to prevent leakage.
English
8