background image

Caution

 

Risk of product damage! Make sure that the power 
voltage corresponds to the voltage printed on the 
back or underside of the clock radio.   

 

Risk of electrical shock! When you unplug the power 
cord, always pull the plug from the socket. Never pull
the cord. 

 

 

Note

 

3

 

Get started

Always follow the instructions in this chapter in 

The batteries can only back up clock and alarm 
settings.

Connect the power adaptor to the wall outlet. 

sequence.

Install batteries

Connect power

Caution

 

Risk of explosion! Keep the batteries away from heat,
sunshine or fire. Never discard batteries in fire. 

 

Batteries contain chemical substances, so they should 
be disposed of properly. 

 

Do not mix battery types: e.g. alkaline with carbon 
zinc. Only use batteries of the same type for the set.

The type plate is located at the bottom of the clock
 radio.

Insert 2 AAA batteries (not provided) with 
correct polarity (+/-) as illustrated.

Set time

Note

 

You can only set time in standby mode.

1  

In standby mode, press and hold 

SET TIME

 

for 2 seconds.

Press 

HR

 to set hour and 

MIN

 to set 

minute, then press 

to confirm.

SET TIME

The time is set.

5

EN

Summary of Contents for R3306







Reviews: