Philips QuadraAction 7864XL, Manual

Page: 11 / 36

11
1
Connect cord to razor. Connect charging plug into any 100V
to 240V AC outlet. Use only the charging plug provided. As
you charge razor, the “20” Section on the display turns red.
After approximately 3 minutes, it will then turn green and
blink. As charging continues, more and more sections of the
display meter will briefly blink green and light up to indicate
what level (percentage) of the batteries have been charged.
You can shave immediately (corded).
An adaptor plug may be necessary for charging plug usage in
some foreign countries. Use an attachment plug adaptor of the
proper configuration for power outlet.The charging plug will
automatically convert to work on 100V to 240V AC Systems.
Do not charge razor in pouch.
2 First time charging and recharging after non-use for
1 month or more requires a full 4 hours.
When batteries are fully charged, all the “blocks” on
the display will light up green.
Recharging
1 First time charging requires 4 hours. After initial charge,
recharging requires approximately 1 hour.
2 Disconnect the charging plug from outlet. Do not keep
razor permanently plugged into outlet.
Quick Charge
When batteries are totally depleted, recharging the razor
for approximately 6 minutes gives enough energy for a
3 minute cordless shave.
PUT IT TO THE TEST & SHAVING TIPS
21 Day Trial and Conversion Process. It is a fact that your
skin and beard need time to adjust to a new shaving
system.
Use your new razor exclusively for 3 weeks to fully enjoy
the closeness of a Norelco shave.*
At first you may not get as close a shave as you expect,
or your face may even become slightly irritated.This is
normal since your beard and skin will need time to adjust.
Invest 3 weeks and you'll soon experience the full joy of
your new razor.