Service Modes, Error Codes, and Fault Finding
5.
back to
Table 5-2 Factory mode overview
Item Item value
Default value
Description
32"
40"
42"
47"
48"
55"
65"
0
F/W VERSION
Press OK
Displays the software versions of the supplier, Flash PQ, Smart Picture,
BL Dimming, Source Meter, the Picture Quality checksum, the Dimming library, the
Source meter library, the Flash AQ, the MTK, MCU and OAD software versions.
1
PANEL_ID
See table
6-3 Display code overview
Displays and changes the Panel ID with the left and right cursor; be careful
changing this, it can result in not correct displaying the screen!
2
TUNER_ID
5
5
5
5
5
5
3
Displays and changes the Tuner ID with the left and right cursor. Not to be changed
when the tuner is replaced with the correct service part.
3
DEMOD_TYPE
3
0
3
3
3
3
4
Choose demod type.
4
ERR Code: xxx xxx xxx
xxx xxx
000 000 000 000 000
Values showing the last 5 errors during the last 50 hours of operation, according to
table
5-4 Error code overview
5
CLEAR ERROR BUFFER Press OK
Selecting this clear all current error codes.
6
NVM ADDRESS
0
NVM address 0 to 8191, Use Item 6 to change and 7 to store the data to the correct
NVM address
7
NVM VALUE
0
Displays the value at the NVM address of item 5
8
NVM STORE
Press OK
Use this option to save the data of item 6 to NVM address of item 5
9
NVM COPY TV to USB
Press OK
Use this to store the NVM data to the REPAIR folder of a FAT formatted USB
memory stick. The TV will write two files in the REPAIR folder of the memory stick.
It will create this folder if it does not exist. The items are “Channel list”, “Personal
settings”, “Option codes”, “Display-related alignments” and “History list”. In case the
download to the USB stick was not successful “Failure” will appear. In this case,
check if the USB stick is connected properly. Now the settings are stored onto the
USB stick and can be used to download onto another TV or other SSB. Uploading
is of course only possible if the software is running and if a picture is available. This
method is created to be able to save the customer’s TV settings and to store them
into another SSB.
10
NVM READ USB to TV
Press OK
Use this to store the NVM data from the USB memory stick to the TV. The TV will
save the two files which were created in item 8 to the NVM of the set. Use these
options when replacing a SSB. When “USB to TV Success” is displayed remove the
power and restart the TV
11
RESET_PBS_PWD
Press OK
Use this to reset the Child Lock
12
DIM_LIB RESET
Press OK
Reset the Dimming
13
SRC_METER RESET
Press OK
Reset the Source meter
14
AMBLIGHT RESET
Press OK
Reset Ambilight
15
ACFG RESET
Press OK
Reset ACFG
16
CIPLUS QUERY
Press OK
Shows the Validity of the CI+ key and the supplier information
17
CIPLUS UPDATE
Press OK
Used to enter a new CI+ code into the NVM. This can only be used when no CI+
code exists in the NVM
18
EDID UPDATE
Press OK
Used to enter a new EDID codes into the NVM
19
TEST PATTERN
Press OK
With the “left” and “right” keys of the remote control various test patterns can be
chosen
20
VIRGIN_MODE
Off
Use this to return the set to virgin mode. Depends whether the set has been used
already.
21
E-Fuse
On
E-fuse mode
22
ORT_MODE
Off
ORT mode
23
VGA_UART_SWITCH
Off
When switched “on” the VGA port can be used for UART logging.
24
DRMWARNING
Off
Off
Off
On
On
On
On
Warning the data rights management
25
AGEING MODE
Off
Use this for aging a new LCD panel
26
CLR_TEMP_R
255
Red colour temperature setting
27
CLR_TEMP_G
255
Green colour temperature setting
28
CLR_TEMP_B
255
Red colour temperature setting
29
AUTO_COLOR
Press OK
PC: any pattern that has black and white, YPbPr: SMPTE bar (colour bar), any
timing.
30
ADC_GAIN_R
146
0
0
83
0
0
0
Red ADC gain
31
ADC_GAIN_G
145
0
0
81
0
0
0
Green ADC gain
32
ADC_GAIN_B
138
0
0
80
0
0
0
Blue ADC gain
33
ADC_OFFSET_R
134
128
128
88
128
128
128
Red ADC offset
34
ADC_OFFSET_G
132
128
128
81
128
128
128
Green ADC offset
35
ADC_OFFSET_B
200
128
128
86
128
128
128
Blue ADC offset
36
YPBPR_PHASE
20
InValid
InValid
InValid
InValid
InValid
InValid
Not available for this chassis
37
AUD_GAIN_LINEIN
0
Line-in audio gain
38
AUD_GAIN_HDMI
0
HDMI audio gain
39
AUD_GAIN_ATV
0
Analogue TV audio gain
40
AUD_GAIN_DTV
0
Digital TV audio gain
41
AUD_GAIN_USB
0
USB audio gain
42
AQ_INDEX
11
9
3
3
9
4
5
Audio Quality index
43
AUDIO TEST MODE
Off
Used for audio testing during production
44
AUDIO CHANNEL TYPE
2.0
2.0
0.0
0.0
2.0
2.0
0.0
Defines the installed speaker system
45
AUDIO SRS
Off
Audio SRS
46
DUMP PQ FROM TV
Press OK
Saves the picture quality data to a file “pq.bin” to the root of a FAT formatted USB
memory stick
47
LOAD PQ to TV
Press OK
Loads the picture quality data from a file “pq.bin” in to the TV
48
DUMP AQ FROM TV
Press OK
Saves the audio quality data to a file “AQ.bin” to the root of a FAT formatted USB
memory stick
