background image

Plasma Swivel Stand 
(PSS-2000BR/SS)

BEFORE YOU BEGIN                                                                         

CAUTION:  To prevent damage to the stand, which could affect or void the Factory warranty, thoroughly 
study all instructions and illustrations before you begin to install or operate the unit.  Pay particular atten-
tion to the “Important Precautions” on Page 1.

The maximum weight to be installed on the PSS is 150 pounds (68.36 Kg)

If you have any questions about this assembly, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.

I N S T R U C T I O N       M A N U A L

The Plasma Swivel Stand (PSS-2000) is available in black 
(PSS-2000BR) or silver (PSS-2000SS) to securely mount 
your large flat panel display.  A stylish solution for residential, 
commercial and business applications, the PSS-200 pro-
vides a wide variety of features for most table top installa-
tions.

Features i/-45 degrees of swivel, free standing with 
bolt down capability for permanent installation or security, 
infinite height adjustment of 5” and two cable options for 
ease of installation.  The PSS-2000 swivel feature offers 
optional stops at +/-15 degrees, 25 degrees or 35 degrees.  
The infinite height adjustment of 5” allows for different screen 
heights up to 32 inches and cables may extend from the back 
of the display or be routed through an access hole in the mid-
dle of the stand.

The PSS-2000 uses Chief’s exclusive Q-Latch™ Mounting 
System for easy installation, stable mounting and quick 
release.  A video conferencing shelf, aesthetic cover kit, and 
Q-clamps for added security are available.

CHIEF MANUFACTURING INC.

1-800-582-6480

  952-894-6280  FAX 952-894-6918

8401 EAGLE CREEK PARKWAY, STE. 700
SAVAGE, MINNESOTA 55378  USA

PART NO. 8800-000039 (Rev. D)

©

2004 Chief Manufacturing

www.chiefmfg.com

09-05

Summary of Contents for (PSS-2000BR/SS)








Reviews: