To reset the device, press and hold the reset
button on the back side of your device by using a
small, pointed object, for example, a paper clip
Press to mute yourself
Press or to change
the volume of the speaker
IN
R
12V
R
IN
R
12V
IN
You can use the “IN” USB Type-C port to connect
a second PSE0501 device (cable not included) to
further increase the range
Hold
for 1 second, to disconnect
from the current device
6
5
Go to the
bluetooth
settings of
your device
and choose
"PSE0501" in
the list
4
1 sec
starts blinking blue and
the speaker says "pairing"
2
1
7
stops blinking and lights up blue.
The speaker says "connected"
To fully unpair,
go to the
bluetooth
settings of
your device
and remove
"PSE0501"
1 sec
Press to turn
the device on
Hold for 1 second (only
required at initial setup)
1 sec
3
IN
R
12V
Connect the USB cable to the “USB / OUT”
port of the device and to a computer.
Note: The device can only be charged via
the AC adapter
You can now use the
device with various
meeting software, by
selecting "PSE0501"
1
2
3
1 sec
Press to turn the device on
IN
R
12V
1
2
3
Connect the AC adapter to the
device and a power socket
The LEDs on the top of the
device indicate the battery
status and stop blinking after
the device is fully charged
Connect the correct plug
to the AC adapter
